Creating A Winpe Image - Dell Brocade Adapters Installation And Reference Manual

Creating a WinPE image

Microsoft Windows Preinstallation Environment (Windows PE) is a bootable tool that provides
minimal operating system features for installation, troubleshooting. and recovery. Please refer to
the Microsoft Preinstallation Environment User's Guide for more information about Windows PE.
You can customize WinPE to boot a diskless host system (system without a hard disk or operating
system) that contains Brocade Fibre Channel adapters and accomplish the following tasks.
•
•
Use the following procedures to create a WinPE image that includes the Brocade driver package
and utilities for your system.
1. Download Windows Automated Installation Kit (WAIK) for Windows 7 from the Microsoft
2. Create a bootable CD or USB drive from this image using appropriate burning software and
3. Determine the appropriate adapter driver package for your operating system and host platform
4. Download the latest Windows Server 2008 driver package for your host platform from the
5. Double-click the driver package and extract to a folder (such as C:\temp) on your local system.
6. Go to C:\temp\util and enter the following command to create the WinPE iso image.
7.
Brocade Adapters Installation and Reference Manual
53-1002144-01
Boot systems over SAN without operating system or local drive
Update the firmware and BIOS/EFI images in the adapter. The adapter tools and utilities
bundled in the driver aid in updating the adapter flash.
Install pre-configured Windows system images from a network share onto new computers that
access the storage through Brocade adapters.
website. This kit is in .ISO format.
install WAIK on your local system where you will create the WinPE image.
using information in "Software installation and driver packages"
The WinPE image creation is based on the Vista kernel. Therefore, use the driver package for
Windows Server 2008 or later. You cannot use the Windows Server 2003 driver packages to
create the WinPE image.
Brocade adapters website using the following steps.
a. Go to the adapters website at www.brocade.com/adapters.
3. Navigate to the adapters Downloads page.
4. Select your operating system from the Downloads list to display appropriate download
files.
b. Download the file from the "Driver Packages" area.
This package contains the script build_winpe.bat, which you will use to create the customized
WinPE image.
The build_winpe.bat script will be located under the \util sub-directory.
build_winpe.bat
Burn the ISO image into a CD or USB drive using appropriate software.
4
on page 43.
169