Updating Boot Code With Hcm - Dell Brocade Adapters Installation And Reference Manual

•
For servers with operating system and Brocade adapter drivers installed, you can use BCU
commands or HCM directly to update boot code on adapters.
For servers without a hard disk, operating system, and adapter drivers installed, you can download
Linux LiveCD ISO images and create WinPE ISO images to boot the server, then use BCU
commands to update the boot code. For instructions on using these ISO images, refer to
systems over SAN without operating system or local drive"

Updating boot code with HCM

Follow these steps to upgrade adapter flash memory with the latest boot code.
1. Download the boot code image zip file (brocade_adapter_boot_fw_<version>.zip) from the
2. Extract the boot code image file.
3. Launch HCM.
4. Select a host on the device tree, and then select Adapter Software from the Configure menu.
5. Enter the filename of the boot image in the Boot Image File text box.
6. Click Start Update.
7.
NOTE
Since updating the Solaris and VMware ESX driver requires rebooting the system, the boot code
cannot be updated along with the driver using the Adapter Software dialog box. HCM will not restrict
selecting the Boot image for update on the Solaris or ESX platforms.
Brocade Adapters Installation and Reference Manual
53-1002144-01
Viewing the adapter Properties panel in HCM. To view the panel, select the adapter in the
device tree, then click the Properties tab in the right pane.
Brocade adapters website using the following steps:
a. Go to the adapters website at www.brocade.com/adapters.
b. Navigate to the adapters Downloads page.
c. Select your operating system from the Downloads list to display appropriate download
files.
d. Download the boot code image from the "Boot Firmware" area.
The Adapter Software dialog box displays.
OR
Click the Browse button and navigate to the location of the file to update.
The selected file downloads. If an error occurs during the downloading process, an error
message displays.
Review the installation progress details that display in the dialog box to determine if the files
install successfully.
Boot code updates
on page 167.
4
"Boot
119