Notes - Dell Brocade Adapters Installation And Reference Manual

To update drivers with HCM, use the following steps:
1. Determine the correct driver package for your host system platform by reviewing
2. Download the driver package for your host system operating system and platform from the
3. Select a host on the device tree, and then select Adapter Software under the Configure menu.
4. Enter the filename of the updated driver in the Driver File text box.
5. Select Start Update.
6. Review the installation progress details that display in the dialog box to determine if the files

Notes

•
•
•
Brocade Adapters Installation and Reference Manual
53-1002144-01
page 44.
Brocade adapters website using se the following steps.
a. Go to the adapters website at www.brocade.com/adapters.
b. Navigate to the Downloads page.
c. Use one of these options to download the driver package:
•
Select your host's operating system from the Download Individual Software Installers,
Drivers, or Documents list, then select the driver package.
•
Select Download ISO Image to download an ISO 9660 (.iso) optical disk image
containing the Brocade Adapter Software Installer, individual driver packages, HCM,
and documentation.
The Adapter Software dialog box displays.
OR
Click the Browse button and navigate to the location of the driver file to update.
The selected file downloads. If an error occurs during the downloading process, an error
message displays.
install successfully.
NOTE
During the installation, a warning message may display that the installed boot image is not
compatible with drivers being installed. You can obtain current boot image files from the
adapters website and install these through the Adapter Software dialog box. Refer to
boot code with HCM" on page 119 for instructions.
This feature upgrades existing software installed on the host system. Downgrades are not
supported.
During installation, dialog boxes validate installation success. Since the Solaris and VMware
ESX Server operating systems require a reboot for the driver update to take effect, successful
installation is not validated in the dialog boxes.
Since the ESX 5,0 driver installation process does not enforce maintenance mode, it is
recommended that you put the host in maintenance mode, as since a system reboot is
required after installation.
Updating drivers with HCM
Table 9
3
on
"Updating
111