Wol And Sol Limitations; Host Bus Adapters - Dell Brocade Adapters Installation And Reference Manual

Brocade adapters installation and reference manual
Hide thumbs Also See for Brocade Adapters:
Table of Contents

Advertisement

1

Host bus adapters

Storage systems
Using Brocade CNAs you can connect a server (host system) to a Fibre Channel SAN through
connection with a compatible FCoE switch. For a current list of compatible switches, servers, and
applications, refer to the latest interoperability matrices on Brocade's website at
www.brocade.com/adapters
NOTE
The CNA can connect with a network switch and perform NIC functions for network traffic.

WoL and SoL limitations

The following describes limitations of support for Wake on LAN (WoL) and Serial over LAN (SoL) for
the Brocade 1007 adapter:

Host bus adapters

Brocade
current Brocade Fibre Channel PCIe HBAs. These adapters provide reliable, high-performance host
connectivity for mission-critical SAN environments.
TABLE 5
Model Number
425
415
804
815
825
1.
2.
Two types of HBAs are available:
12
.
WoL. The adapter does not support WoL over its 10GbE links. WoL is supported using the IBM
BladeCenter 1GbE NIC included on the IBM server blades.
SoL. The adapter does not support SoL over its 10GbE links. SoL is supported using the IBM
1GbE NIC included on the IBM server blades.
Table 5
provides the model number, port speed, number of ports, and adapter type for the
HBA model information
Port Speed
4 Gbps maximum
4 Gbps maximum
8 Gbps maximum
8 Gbps maximum
8 Gbps maximum
A 4 Gbps SFP installed in Brocade 815 or 825 HBAs allows 4, 2, or 1 Gbps.
An 8 Gbps SFP+ installed in Brocade 425 or 415 HBAs allows 4 or 2 Gbps only.
Stand-up adapters.
These are low-profile MD2 form factor PCI Express (PCIe) cards, measuring 6.6 in. by 2.714 in.
(16.765 cm by 6.89 cm), that install in PCIe connectors in standard host systems.
Mezzanine adapters.
These are smaller cards that mount on server blades that install in blade system enclosures.
Fibre Channel communications are routed through the adapter ports on the blader server to
the blade system enclosure midplane and onto the installed switch modules installed in the
enclosure.
Number of Ports
Adapter Type
1
2
Stand-up
1
1
Stand-up
2
Mezzanine
2
1
Stand-up
2
2
Stand-up
Brocade Adapters Installation and Reference Manual
53-1002144-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade 825

Table of Contents