Confirming Driver Installation With Solaris Tools - Dell Brocade Adapters Installation And Reference Manual

3
Confirming driver package installation

Confirming driver installation with Solaris tools

Verify if the driver packages installed successfully using the following commands:
NOTE
Brocade 804 and 1007 adapters are not supported on Solaris systems, so commands in this section
do not apply to these adapters.
•
•
•
VMware
Verify if the adapter driver installed successfully using the following commands:
106
These commands display information about loaded kernel modules.
modinfo|grep bfa
modinfo|grep bna
If the storage driver package is installed, bfa Brocade Fibre Channel Adapter Driver should
display.
If the network driver package is installed, bna Brocade Fibre Channel Adapter Driver should
display.
These commands check for and lists the installed driver package files.
pkgchk -nv bfa
pkgchk -nv bna
This command displays all available information about software packages or sets that are
installed on the system.
pkginfo -l
For example, if the storage driver package is installed, bfa_pkg should display with a
"complete" install status in the list of installed packages.
PKGINST: bfa
NAME: Brocade Fibre Channel Adapter Driver
CATEGORY: system
ARCH: sparc&i386
VERSION: alpha_bld31_20080502_1205
BASEDIR: /
VENDOR: Brocade
DESC: 32 bit & 64 bit Device driver for Brocade Fibre Channel adapters
PSTAMP: 20080115150824
INSTDATE: May 02 2008 18:22
HOTLINE: Please contact your local service provider
STATUS: completely installed
esxcli software vib list | grep bfa
Brocade Adapters Installation and Reference Manual
53-1002144-01