Netopia R9100 Ethernet Router Status Lights - Netopia R9100 User Reference Manual

3-4 User's Reference Guide

Netopia R9100 Ethernet Router status lights

The figure below represents the Netopia R9100 status light (LED) panel.
Netopia R9100 LED front panel
WAN 1
The following table summarizes the meaning of the various LED states and colors:
When this happens...
The Ethernet WAN interface is operational
The Ethernet WAN interface detects a collision
In normal operation
When data is transmitted or received over the Ethernet link
Note: 2, 5, 8 – 11 are unused. Also, Console carrier (6) is ignored if the console is not configured for a
remote modem.
WAN 2 Ethernet
3 is green.
3 flashes orange.
4 is off.
4 flashes yellow.
Link/Receive
the LEDs...