General Statistics - Netopia R9100 User Reference Manual

12-4 User's Reference Guide

General Statistics

To go to the General Statistics screen, select General Statistics and press Return. The General Statistics
screen appears.
Phys I/F---------Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err
Ethernet Hub
Aux Async
Ethernet Wan1
Unused 2
Console
Network----------Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err
IP
IPX
AppleTalk
The General Statistics screen displays information about data traffic on the Netopia R9100's data ports. This
information is useful for monitoring and troubleshooting your LAN. Note that the counters roll over at their
maximum field width, that is, they restart again at 0.
Physical Interface
The top left side of the screen lists total packets received and total packets transmitted for the following data
ports:
Ethernet Hub
Aux Async or LocalTalk (if the optional AppleTalk feature set is installed)
SDSL 1
Network Interface
The bottom left side of the screen lists total packets received and total packets transmitted for the following
protocols:
IP (IP packets on the Ethernet)
IPX (IPX packets on the Ethernet) if IPX is enabled
AppleTalk (AppleTalk packets on Ethernet using EtherTalk Phase II if the optional AppleTalk feature set is
installed)
General Statistics
123456789 123456789
123456789 123456789
123456789 123456789
123456789 123456789
123456789 123456789
123456789 123456789
123456789 123456789
12345678 12345678
12345678 12345678
12345678 12345678
12345678 12345678
12345678 12345678
12345678 12345678
12345678 12345678
12345678 12345678
12345678 12345678