Table of Contents
Advertisement
8-4 User's Reference Guide
The Add Connection Profile screen appears.
Profile Name:
Profile Enabled:
IP Enabled:
IP Profile Parameters...
IPX Enabled:
Data Link Encapsulation...
Data Link Options...
Telco Options...
ADD PROFILE NOW
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Configure a new Conn. Profile. Finished?
On a Netopia R9100 Ethernet Router you can add up to 15 more connection profiles, for a total of 16, but you
can only use one at a time.
1.
Select Profile Name and enter a name for this connection profile. It can be any name you wish. For
example: the name of your ISP.
2.
Toggle the Profile Enabled value to Yes or No. The default is Yes.
3.
Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.
Address Translation Enabled:
Local WAN IP Address:
Remote IP Address:
Remote IP Mask:
Filter Set...
Remove Filter Set
Receive RIP:
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
Add Connection Profile
Profile 02
Yes
Yes
No
PPP
CANCEL
ADD or CANCEL to exit.
IP Profile Parameters
Yes
0.0.0.0
0.0.0.0
0.0.0.0
Off
Advertisement
Table of Contents
