Table of Contents
Advertisement
To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.
Baud Rate...
Hardware Flow Control:
SET CONFIG NOW
Follow these steps to change a parameter's value:
1.
Select the parameter you want to change.
2.
Select a new value for the parameter. Return to step 1 if you want to configure another parameter.
3.
Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameters
unchanged and exit the Console Configuration screen.
SNMP (Simple Network Management Protocol)
These screens allow you to monitor and configure your network by means of a standard Simple Network
Management Protocol (SNMP) agent.
Details are given in
Security
These screens allow you to add users and define passwords on your network.
Details are given in
Upgrade feature set
You can upgrade your Netopia R9100 by adding new feature sets through the Upgrade Feature Set utility.
See the release notes that came with your router or feature set upgrade, or visit the Netopia Web site at
www.netopia.com for information on new feature sets, how to obtain them, and how to install them on your
Netopia R9100.
Console Configuration
"SNMP" on page
12-12.
"Security" on page
13-1.
WAN and System Configuration 8-13
57600
No
CANCEL
Advertisement
Table of Contents
