Step 3 Install Handlebar; Junction Box - Schwinn SR23 Assembly Manual

Step 3 Install Handlebar
Parts:
• Seat Frame (Ref. K)
• Handlebar (Ref. J)
• Four M8x16 screws (Ref. I-5)
• Four 8x16x2 Washers (Ref. I-3)
Tools:
• Supplied Allen Wrench
3-1 Align Handlebar with holes in Seat Frame.
3-2 Route the handlebar heart rate wire under the junction box
making sure that the wires won't be pinched. Connect the
handlebar heart rate wire to the jack on the Seat Frame junction
box labeled "PULSE INPUT".
3-3 Install and completely tighten the hardware.
NOTE: Be careful not to pinch the wires when tightening the
hardware.
J
K
Heart rate wire
Junction box