Schwinn SR23 Assembly Manual page 15

Step 8 Prepare to Install Seat Assembly
Tools:
• Supplied Allen Wrench
8-1 Unscrew the seven screws and washers (D-18) that secure the
Seat Rail (H) and remove the Seat Rail from the unit. (Figure A)
Note: You will have to disconnect the Heart Rate Wire (M).
Do not let the Heart Rate Wire fall into the frame.
8-2 Unscrew the two screws and washers (D-18) that secure the
Seat Rail Bracket (D-22) and remove the bracket from the Seat
Rail. (Figure B)
\
D-22
D-18
Figure A
Figure B