Schwinn SR23 Assembly Manual page 14

Step 7 Install Seat Back Assy and Seat Back Cover
Parts:
• Seat Back Cover (Ref. L-2)
• Seat Back Assy (From step 5)
• Five M8x35 Screws (Ref. I-9)
• Five 8x16x2 Washers (Ref. I-3)
• Seat Adjust Knob (Ref. 1-10)
• Washer 10x25x2t (Ref. I-11)
Tools:
• Supplied Allen Wrench
7-1 Place the threaded post on the Seat Bracket (L) through the slot
in the Seat Frame (K).
7-2 Attach the Seat Back Cover to the Seat Back Assembly using
five M8x35 Screws (I-9) and five 8x16x2 Washers (I-3).
7-3 Install the Seat Adjust Knob (I-10) and washer 10x25x2t (I-11)
onto the threaded post.
Threaded Post L-2
i %
j1-11
1-10
I-9