Step 3 Install Handlebar - Schwinn SR23 Recumbent Bike Assembly Manual

Step 3 Install Handlebar

Parts:
• seat Frame (Ref. K)
• Handlebar (Ref. J)
• Four m8x1 screws (Ref. i-5)
• Four 8x1x washers (Ref. i-3)
tools:
• supplied Allen wrench
3-1 Align Handlebar with holes in seat Frame.
3-2 Route the handlebar heart rate wire under the junction box
making sure that the wires won't be pinched. connect the
handlebar heart rate wire to the jack on the seat Frame junction
box labeled "Pulse inPut".
3-3 install and completely tighten the hardware.
NOTE: be careful not to pinch the wires when tightening the
hardware.
I-5
I-3
Heart rate wire
Junction box
J
K