Schwinn SR23 Assembly Manual page 18

Step 11 Install Handlebar
Parts:
• Handlebar (Ref B)
• Washer (Ref I-3)
• Screw M8x16 (Ref I-5)
11-1 Tuck the Computer Wires into the Mast to allow insertion of
the Handlebar.
11-2 Slide the Handlebar (B) into the Mast and secure with the
Console M8x16 Screw (I-5) and Washer (I-3). (Figure A)
11-3 Pull the Computer Wires back up through the Handlebar as
shown. (Figure B)
B
Figure B
Figure A
1!/