Schwinn SR23 Assembly Manual page 17

Step 10 Install Handlebar Mast
Parts:
• Handlebar Mast (Ref C)
Tools:
• Supplied Allen Wrench
10-1 Remove the four Allen Bolts (0-1) and Curved Washers (C-2)
from the frame.
10-2 Connect the Upper and Lower Computer Wires and Heart Rate
Wires. (Detail A)
10-3 Insert the Handlebar Mast (C) into the main unit.
10-4 Re-install the four Allen Bolts and Curved Washers and
completely tighten.
Detail A
C
16