Schwinn SR23 Assembly Manual page 19

Step 12 Install Computer Bracket
Parts:
• Computer Bracket (Ref. A-1 )
• Angle Adjust Knob (Ref. I-2)
• Carriage Bolt M8x1.25x85 (Ref. 1-13)
• Screw M8x85 (Ref. I-1 )
• 2 Washers (Ref. I-3)
• Hex Nut (Ref. I-4)
Tools:
• Supplied Socket and Flat Wrenches
12-1 Align the Computer Bracket (A-l) with the holes in the Mast.
(See assembled view for reference)
12-2 Install and completely tighten the hardware.
Note: Use the Angle Adjust Knob to position the Computer to fit
individual preferences.
I-3
/
I-4
Assembled