Labeling Channels - RCA P46721 User Manual

The labeling feature lets you program
names (or labels) for the channel
numbers. The name you program
will then pppear on the screen below
the channel numbei" whenever the
channel number is displayed.
Each name cancontain up to four
characters, and you'll be able to
assign up to 64 names. After 64
names or labels have been entered,
the TV will display this, message to
let you know no more channels can
be labeled: CHAN LABEL: FULL
Listed below are the letters and
characters from which you'll be able
to choose whenprogramming the
charmel labels!
ABCDEFGH1JKLM
NOPQRSTUVWXYZ
(blank space) ! "# $ % &' ( )
_+,_./0123456789:;
<=>?@
You must use your remote control to
create or erase labels.
. _ . . . ---,
. -'., ,.
Labeling Channels (with remote only)
1. Repeatedly press MENU to select 5.
SETUP MENU, and then press + or -
to display setup functions. Repeatedly
press MENU to select CHAN LABEL
function.
Then press + to move to the next
letter frame. Pressing - moves you
back to the previous letter frame.
D
Press + to enter the CHAN LABEL
function. Four blank letter frames
will appear under the channel number.
.
-7.
Repeat steps 4 and 5 until the name
is complete. You can now label
another channel, if desired, by.
selecting the channel number and
repeating steps 4 and 5.
When finished, the display will
automatically disappear from the
screen in a few seconds. Your
labels will remain in memory until
you erase them. They are not •
affected by power failures.
=
Select the channel number you want
to label by pressing the CHAN up or
down button (or by pressing two
number buttons).
Erasing Labels
To erase a channel label, first follow
steps 1, 2, and 3 above, and then press
CLEAR on the remote control.
.
Press and hold the VOL up or down
button until the letter or character you
want appears on the screen. Pressing
VOL up sequences through the
characters in alph_ibetical order.
Pressing VOL down sequences the
letters in reverse order.
Note: Autoprogramming new channels
into the channel memory does not effect
the channel labels that are already entered.
2O