Tv Fun&Ions - RCA P46721 User Manual

Only the buttons that are used to control the TV are
described here. The rest of the buttons are used to
operate VCRs (pages 37-38), Cable-TV boxes
(pal;e 33), and audio equipment (page 42).
.
.
\
\
®
®
(9
.@
@
@
®
®
@
q)
TV Button
• Turns on TV and puts remote in "TV Mode" so that the other
remote buttons will control the TV.
• Displays time (if clock has been set) and channel number on the
TV screen.
Important Note: Some buttons on the remote control will not
control the TV unless the remote is in the "TV Mode". If another
component button (such as VCR2) is pressed, the remote will go into
the "VCR Mode" and will control a compatible VCR. To get back
into the '"rv Mode", simply press the button labeled TV. The remote
will go back into the "TV Mode" and will control the TV again.
®
SKIP (Commercial Skip) Button
• Use this button when you want to scan othe_ channels during a
program break.
• When a break occurs, press SKIP once before changing channels.
The TV will count down 30 seconds on the screen and then
automatically switch channels back to the original channel.
• Press SKIP twice if you want the TV to count down 60 seconds.
Each additional .press will add another 30 seconds to the
countdown time (up to five minutes) and then each additional
press will add another 60 seconds to the countdown time. (up to
60 minutes).
• To cancel, press CLEAR. The countdown clock will disappear
from the screen, and the TV will stay tuned to the present
channel.
• When CLOSED CAPTIONING is turned on, the counter will only
displays for two seconds.
ltlr