Table of Contents
Advertisement
Beforeattempting t ooperate y our
remote control, i nstallthebatteries
asshown here.
Theremote control p roduces an
invisible(infrared) b eam thattravels
in astraight l ine muchasthebeam
of a flas .hlight. F orthisreason,
whenoperating t heremote control,
youmustpointit directlyatthefront
oftheTV withoutobjects b etween
thatcanblocktheinfrared light
beam.
Yourremote controlis designed t o
beveryrugged andwill withstand a
considerable drop.If it receives a n
extreme blow,thecase is designed
to slightlyseparate a ttheseam
rather t hanfracture.If thishappens,
sirnplysqueeze thecase where it
separated untilit snaps b ack
together. T heoperation ofthe
remote will probably notbeaffected.
--Installing/Replacing
Batteries
1. Turn the
remote control face
down.
2. Pull off the cover of the battery
compartment.
Notes:
• Never place anything heavy on top of
the remote control or lay it upside-
down. This may accidentally depress
the buttons for a long time and
discharge the batteries.
3. Install four "AAA" batteries in the
battery compartment as shown,
matching the -I- and m end of
each battery in the compartment.
4. Replace the cover and turn remote
over-face up.
Replace the batteries when the TV fails
to respond to the remote control.
If you programmed your remote to
control other components, you may
have to reprogram the code numbers
when you change the batteries. Try not
to press any buttons while changing
batteries.
8
Advertisement
Table of Contents
