Table of Contents
Advertisement
Yottr TV has two separate
antenna
inputs on the back (labeled ANTA
and ANTB)
that allowyou
to connect
two different
signal sources if
desired.
For example, you can
connect a cable-TV
System to one
input and a home antenna to the other
input.
By changing
the ANTENNA:
A/B
display in the SETUP menu, you can
switch back and forth between
the
two signal sources.
Listed below are some other common
use:; of the two antenna inputs:
• connecting a cable-TV system (or
antenna) to one input and a VCRto the
other.
• connecting a cable-TV system (or
antenna) to one input and.a video game
to the other.
• connecting a double-trunl( cable
system to both inputs,
• connecting a cable-TV
converter/decoder box that scrambles
only premium channels. Connection
details are on pages 31-32.
• connecting a cable-TV system to one
inputand an antenna (VHF/UHF) to
the other. This allows you to tune in
local stations that are not included on
your cable system. Remember to
change the CABLEZAIR function as
described on page i8 if using your set
t_ke this. -
The Channel Memory
is the list of
ch;mnels your TV will stop on when
you press the CHAN up or"down
buttons.
Your TV provides
two
separate Channel
Memories-one
for
ANTA
input and one forANTB
input. This alloWs you to add or
delete channels
into each channel
memory as desired.
When you use the AUTOPROGRAM
ftmction, the TV automatically
checks both inputs and sets up a
separate
channel memory
for each.
Changing
Antenna Input
(with remote)
.
Press the ANT (Antenna) button on
the remote control to switch from the
ANTA input to the ANTB input.
The color of the channel numbers
will change from blue to yellow to
let you know you are now watching
whatever signal is connected to the
ANT B jack on the back of the TV.
,for
Yellow for
2. Press the ANT button again to switch
back to ANTA.
Thecolor of the
channel numbers will change back to
blue to let you know you are now
watching whatever signal source is
connected tO the ANTA jack.
(without remote)
1. Repeatedly press MENU to select
SETUP MENU and then press +
or - to display setup functions.
Repeatedly press MENU to select
ANTENNA: A/B function.
2. Press the - or + buttonso change
the setting. The screen display
will change from A to B to let you
know you are now watching
whatever signal is connected to :
the AAr/' B jack on the back of the
TV. The color of the channel
numbers will ,change from blue to
yellow.
3. Press the - or + button again to
switch back to ANTA.
The screen
display' will change back to
ANTENNA: A to let you know you
are now watching whatever signal
source is connected to the ANTA
w
jack on the back of the TV.
23
Advertisement
Table of Contents
