Table of Contents
Advertisement
Your projection
TV has three color
projection
tubes--one for red, one for
g_een,and one for blue. When mixed
together in the proper proportion,
the
output of these three color tubes can
produce many colors.
To produce
these colors, however,
the beams
must be precisely
aligned over each
other so that the colors can be mixed.
"[he process of aligning
these picture
beams is called setting the
6t
"
convergence
.
Over a period of time, the picture
tubes can drift out of alignment
due
to normal bumps and vibrations
or
moving the TV. If you move your
I_¢ or if, after a time, you notice
colored rings or halos around objects
in the picture, you may want to
conyerge
(align) the colors.
Ib simplify convergence,
an on-
screen menu is provided
that allows
ou to display a test pattern of four
hnes on the screen.
Properly
converged,
the lines appear
white-which
is actually a
combination
of the outputs of the
l_hree color tubes.
The position
of the
green lines is stationary.
The
positions
of the red and blue lines are
adjustable.
When properly
adjusted,
the red and blue lines should lie
directly
over the green lines to
produce
single white lines.
Converging
(Aligning)
the Colors
--(with remote only)
1. Turn on the TV and select a channel
that is active in your area. Allow the
TV to operate at least ten minutes
before converging.
2. Repeatedly press the VIDEO button
until the CONVERGENCE function is
selected.
3. Then press the + button to display the
pattern.
i§i
USE
VOL
TV TO EXIT
o
4. When properly converged, all three
colors in the pattern (red, blue, and
green) should align to form white
lines. If you see any red or blue lines
in the pattern, you can move them to
align with the green lines by pressing
the VOL up or down button.
5. Press the + button to select the arrow
color and direction, then press the
VOL up or down button to move the
lines.
Pressing
VOL up or
down when
these blue
alTOWS
appear,
moves the
blue lines
left or right
Pressing
VOL up or
down when
these blue
arrows
appear,
moves the
blue lines up
or down.
Press
+ tO
select arrow
color and
direction.
... III
--
III
USE VOL
TV TO EXIT
1
m
U SE VOL
TV TO
EXIT
1
Pressing
VOL up or
down when
these red
_H
arrows
appear,
USE
VOL
moves ,the
red lines left
TVTO EXIT
or right.
1
..J|!
B
USE
VOL
TV TO EXIT
I
Pressing
VOL up or
down when
these red
",<.
arrows
appear,
moves the
red lines up
or down.
Note: You can also press the -button.to
return to a previous screen. Pressing -
displays the arrows in reverse order than
shown above.
6. When finished, press the TV button
to remove the
pattern
from the
screen.
14
Advertisement
Table of Contents
