Table of Contents
Advertisement
The labeling feature lets you program
names (or labels) for the channel
numbers.
The name you program
will then appear on the screen below
the channel number whenever
the
channel number
is displayed.
Each name can contain up to four
characters,
and you'll be able to
assign up to 64 names.
After 64
names or labels have been entered,
the TV will display this message
to
lel: you know no more channels
can
be: labeled:
CHAN LABEL:
FULL.
Listed below are the letters and
characters
from which you'll
be able
to choose when programming
the
channel labels:
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
(blank space) ! "# $ % &' ( )
A+,-./0123456789:;
<---->?(_
You must use your remote control
to
create or erase labels.
Labeling Channels
(with remote only)
1. Repeatedly press MENU to select
5.
SETUP MENU, and then press + or -
to display setup functions. Repeatedly
press MENU to select CHAN LABEL
function.
.
.
.
12:08 PM
Mute
:
v_eo Menu
.........
Captioning:
Off
,
Parental Ctrl:Off
..°: i, :_,_,
Press + to enter the CHAN LABEL
function. Four blank letter frames
will appear under the channel number.
o
Q
Select the channel number you want
to label by pressing the CHANNEL up
or down button (or by pressing two
number buttons).
i:
i_i:!
;
i. !::i!
.
Press and hold the VOLUME up or
down button until the letter or
character you want appears on the
screen. Pressing VOLUME up
sequences through the characters in
alphabetical order. Pressing
VOLUME down sequences the letters
in reverse order.
Then press + to move to the next
letter frame. Pressing - moves you
back _tothe previous letter frame.
Repeat steps 4 and 5 until the name
is coraplete. You can now label
another channel, if desired, by
selecting the channel number and
repeating steps 4 and 5.
=
When finished, the display will
automatically disappear from the
screen in a few seconds. Your
labels will remain in memory until
you erase them. They are not
affected by power failures.
Erasing Labels
To erase a channel label, first follow
steps 1, 2, and 3 above, and then press
CLEAR on the remote control.
Note: Autoprogramming new channels
into the channel memory does not affect
the channel labels that are already entered.
19
Advertisement
Table of Contents
