Setting Up Cable Box Channel - RCA P46721 User Manual

The CABLE CHAN function lets you
program to which channel the TV
will[ automatically tune when you
press the CABLE button on the
remote._ This is handy if you have to
connect a cableb0.xto your TV. You
wiII no-16nger have to remember the
output channel of the cable box
because the TVwill remember for
you.
For example, if you connect- a cable
box to the TV's CABLE/ANTENNA
cormector(as shown on page 31 or
33), you will no longer have to
remember to select channel 2, 3, or 4
on the TV to see what's coming from
the cable box. By entering the cable
box's Output channel (usually 02, 03,
or 134)next to the CABLE CHAN
function, the TV Will automatically,
tune to that channeleach time you
pre.ss the CABLE button on the
reraote.
This function is especially convenient
if you have a remote-controllable
cable box that can be operated by the
CABLE button on the remote (as
described on page 33). Pressing the
CABLE button will then not only
switch the remote to cable mode but
will also automatically tune the TV to
the proper channel for viewing the
picture from the cable box.
Note: Pressing the CABLE button does not
ch_alg.ebetween ANTA and ANT B antenn_a
inputs as explained on page 18. Press the
ANTbutton on the remote control to change
antenna inputs if necessary.
7Sgtting Up Cable Box Channel (with or without remote)
1. Repeatedly press MENU to select the
SETUP MENU, and tben press + or -
to display the setup functions.
Repeatedly press MENU to Select the
CABLE CHAN function.
3.
Press the + button to program the
channel number you selected into
the CABLE CHAN function memory.
Note: Pressing the - button here will
turn off this feature and display
CABLE CHAN: OFF again.
°
Enterthe channel number you want to
program by pressing two digit buttons
• on the remote coiatrol. (The channel
number you enter is the channel to
which the TV will tune automatically
when you later press the CABLE
button on the remote.) The TV will
change to the channel you select.
This will help• you to Confirm that it is
indeed the channel you want the TV
to automatically tune. Most cable
boxes output their signals On either
channel 02, 03, or 04.
•25