Table of Contents
Advertisement
The
VCR 1 CHAN function
lets you
program
to which channel the TV
will automatically
tune when you
press the VCR button on the remote.
This is handyif
you connect a VCR
to ),our TV. You will no longer have
to remember
to which input jacks the
VCR is connected
because
the TV
will remember
for you.
For example,
if you connect a VCR's
AUDIO/VIDEO
OUT jacks to the
TV's INPUT 1 jacks (as shown on
page 35), you will no longer have to'
remember
to select channel 91 on the
TV to see what the VCR is playing.
By entering
channel 91 next to the
VCR 1 CH-AN function,
the TV will
automatically
tune to channel 91
each time you press the VCR button
on the remote.
This function
is especially
convenient
if you havea
compatible
VCR that can be operated
by the
VCR button on the remote.
Pressing
VCR will then not only turn on the
VCR but also automatically
tune the
TV to the proper channel for viewing
the picture from the VCR.
You can
program
most brands of remote-
co:atrollable
VCRs
to respond
to the
VCR button as described
on page 38.
Tile VCR 2 CHAN function
works
the same way.. It lets you program
to
which channel the TV will
automatically
tune when you press
the VCR2 button on the remote.
You
can program
most brands of remote-
controllable
VCRs to respond
to the
VCR2 button as described
on
page 38. Pressing
the VCR2 button
will then not only turn on the VCR
but also automatically
tune the TV to
the proper channel for viewing
the
picture from the VCR.
Note: Pressing the VCR or VCR2 button does
not change between ANTA and ANTB
amenna inputs as explained on page 18.
Press the ANTENNA button on the remote
control to change antenna inputs if necessary.
-Setting
Up VCR Channels
(with or without remote)
•
1° Repeatedly press MENU to select
4. If you have another VCR connected
SETUP MENU, and then press + or -
to the TV, press MENU to select the
to display the setup functions.
VCR 2 CHAN function.
Repeatedly press MENU to select the
VCR 1 CHAN function.
2. Enter the channel number you want to
program by pressing two digit buttons
on the remote control. (The channel
number you enter is the channel to
which the TV will tune automatically
when you later pressthe VCR button
on the remote.)
.
Enter the'channel number you want
to program by pressing two digit
buttons on the remote control. (This
is the channel number to which the
TV will tune automatically when you
later press the VCR2 button on the
remote.) See the notes below if you
are unsure about which channel
number to enter.
3. Press the + button to program the
channel number you selected into the
TV's memory.
6. Press the + button to program the
channel number you selected into the
VCR 2 CHAN function memory.
Note: Pressing the - button here will turn
off this feature and display
VCR 1 CHAN: OFF again.
Note: Pressing the - button here will
turn off this feature and display
VCR 2 CHAN: OFF again.
Notes about Entering Channel Number:
,
• Enter channel 91 if VCR is connected to the TV's audio and video INPUT 1 jacks.
• Enter channel 92 if VCR is connected to the TV's audio and video INPUT2 jacks.
• Enter channel 90 if you have a Super-VHS VCR that is connected to the TV's
-. S-VIDEO connector and INPUT 1 audio jacks (labeled L and R/MONO).
Enter channel 03 (or 04) if you did not use any audio/video cables and connected the
VCR to the TV's round antenna jack labeled ANTA or ANT B. Enter the same
channel number (03 or 04) as the position of the VCR's CH3/CH4 switch.. This is
the channel to which you must tune your TV for viewing signals from your VCR.
• Refer to pages 35-36 if you want to review details about connecting your VCR to
your TV.
Advertisement
Table of Contents
