Table of Contents
Advertisement
Advanced
Connections
Advanced
connections
give you better sound and video by
separating
the audio and video signals and enabling you to
connect
multiple
components.
This section describes the types of inputs available
on the back
of yourTV and suggests ways you can use them for optimum
performance.
Once you have made your
connections you will need to
program the TV to tune to the
correct Video INPUT channel in order
to see and hear audio and video from
the component, You will program
this later in the Interactive Setup.
J
Back of the TV
The diagram
below describes
each of the back panel jacks.When
connecting
A!V cables, be sure to connect corresponding
OUTPUTS and INPUTS (Video to Video, Right Audio to Right
Audio, etc.).
Video
and Audio
Inputs
Connect any one of the following
components:
• VCR
• Internet Access Device
• Laserdisc Player
• DVD Player
• Satellite Receiver
To view the component
connected
to VIDEO,
use theWHO.INPUT
button on the remote.
\
_
VIDEO
[o
VCR
CONTROL
<out
S_V_D_EO
VCR Control
Connect the GUIDE Plus-
system IR controller
for
one-button
recording
and
channel tuning
from the
GUIDE Plus+ system.
/
S-Video
This optional
connection
can be
used for better
video quality
• picture.
Audio
Outputs
Connect to an audio receiver
or amplifier
for variable
controlled
or fixed level sterec
output.
/
CABLE/
ANTENNA
Cable/Antenna
Takes the signal input from a cable,
cable box, or an off-air antenna. Can also be
used for basic component
connections.
J
6
Advertisement
Table of Contents
