Advanced Connections - RCA PS27600 User Manual

SETUP AND CONNECTIONS
ADVANCED CONNECTIONS
Advanced connections give you better sound and video by separating
the audio and video signals and enable you to connect multiple
components.
This section describes the types of inputs available on the back of your
TV and suggests ways you can use them for optimum performance.
BACK OF THE TV
The diagram below describes each of the back panel jacks. When
connecting A/V cables, be sure to connect corresponding OUTPUTS
and INPUTS (Video to Video, Right Audio to Right Audio, etc.).
Once you have made your connections
you will need to program the TV to tune
to the correct Video INPUT channel in
order to see and hear audio and video
from the component. You will program
this later in the Interactive Setup.
Input 1
Connect any of the following components:
• VCR • Internet Access Device
• Laserdisc Player • DVD Player
• Satellite Receiver
To View the component connected to Input 1:
Use the WHO•INPUT button on the remote.
\
\
i i
\
INPUT 1
VIDEO @
rR@
,@
S-VIDEO
S-Video
This optional
connection
can be used
for better
video quality
picture.
Input 2
Connect any of the following components:
• VCR • Intemet Access Device
• Laserdisc Player • DVD Player
• Satellite Receiver
To view the component connected to Input 2:
Use the WHO• INPUT button on the remote.
• #
• / • 1
Speaker Terminals
Use to connect external
speakers for surround sound.
Make sure the Speaker
Selection is set to
EXTERNAL.
SPEAKERS
INPUT 2
VIDEO L---.AUDIO--R S-VIDEO f
(_L J be used for better video
I_ Audio Outputs
onnect to an audio receiver or
mplifier for variable controlled
r fixed level stereo output.
m
VCR
CONTROL
®-,.
f Cable/Antenna 1
/Takes
the signal input from a cable,
|cable box, or an off-air antenna. Can
|also be used for basic component
connections.
S-Video
This optional connection can
quality picture.
VCR Control
Connect Guide Plus+
controller for one-button
recording and channel
tuning from the Guide.
k.
6