Advanced Connections - RCA P52937 User Manual

ADVANCED CONNECTIONS
Advanced connections give you better sound and video by separating
the audio and video signals and enable you to connect multiple
components.
This section describes the types of inputs available on the back of your
TV and suggests ways you can use them for optimum performance.
Once you have made your connections
you will want to program the TV to tune
to the correct Video INPUT channel in
order to see and hear audio and video
from the component. You will program
this later in the Interactive Setup.
Back of the TV
The diagram below describes each of the back panel jacks. When
connecting AN cables, be sure to connect corresponding OUTPUTS and
iNPUTS (Video to Video, Right Audio to Right Audio, etc.).
Input 1
Connect any of the following components:
• VCR • _ternet Access Device
• Laserdisc Player • DVD Player
• Satellite Receiver
To view the component connected to Input 1:
Use the WHO,INPUT button on the remote
This optional
connection can VEDEO_
be used for [-R
better video Au°'0
quality. _'_ 6!@
S-ViDEO
Audio Outputs
Connect to an audio receiver or
amplifier for variable controlled
or fixed level stereo OUtPUt.
Input 2
Connect any of the following components:
• VCR • Internet Access Device
• Laserdisc Player • DVD Player
• Satellite Receiver
To view the component connected to Input 2:
Use the WHO-INPUT button on the remote.
/
INPUT 2
CablelAntenna
rakes the signal input from a cable,
cable box, or an off-air antenna. Can also
be used for basic c0mp °nent connections.
I! S'Vide0 "1
hi s optional connection can |
e used for better video |
uality. J
G-LINK
Connect the G-LINK Cable
for one-button recording
and channel tuning from
the Guide.
7