Table of Contents
Advertisement
The
Basic
connection
The basic connection
below (TV and VCR) is the most common
connection
and is therefore
used to illustrate
a single component
connection
with your TV. For better sound and picture quality
and
multiple
component
connection
information
refer to the next section,
Advanced
Connections.
Cables
You will use the following
type of cable to make your connection:
Coaxial
Cables:
In this connection,
two coaxial
cables are used: one connects from an antenna,
cable, or cable box to the VCR, and one connects
from the VCR to the TV. These cables carry both
audio and video signals.
CABLE,
CABLE
BOX,
OR ANTENNA
VCR
I
QU1
CH4[_
Cii3
OlJ1
I O IV
TV
To VCR
To cable box (If you do
not have a cable box,
then
leave this portion
unconnected.)
How to View the VCR
To watch the VCR in this connection
tune TV to
Channel 3 or 4.
Later, in the Interactive
Setup section you will
program
the TV to automatically
tune to Channel 3 or
4 when you turn on the VCR.
Once you have completed
this connection
you may skip to Step 3,
"Connect the IR Controller."
5
Advertisement
Table of Contents
