Remote Buttons - RCA F32668YX53 User Manual

Remote Buttons
ON*OFF When inTV mode, turnsTV on and off. If in another
device mode (VCR, DVD, Satellite, etc.) and programmed, will
turn the device on and off. When pressed twice within two
seconds, all devices that are on will be turned off (this feature
only works with most RCA, PROSCAN and GE products).
VCR1 Puts the remote inVCR mode and if autotuning is
enabled, it will turn on theTV and tune to the correct channel.
"rv Turns on theTV and puts the remote inTV mode. Also
displays channel information.
DVD Puts the remote in DVD mode and if AutoTuning is
enabled, it will turn on theTV and tune to the correct channel.
VCR2 Puts the remote in VCR2 mode and if AutoTuning is
enabled, it will turn on theTV and tune to the correct channel.
LED Red light which indicates programming mode when
programming the remote. Also displays when a valid remote
button is pressed.
AUX When pressed, will turn on the RCA, PROSCAN, or GE
component you have programmed it to control. Also turns on
theTV if AutoTuning is enabled and the remote is programmed
to control aTV.
SAT.CABLE Puts the remote in SAT-CABLE mode and if Auto
Tuning is enabled, it will turn on theTV and tune to the correct
channel.
MUTE Reduces theTV's volume to its minimum level. Press
again to restore the volume.
SKIP Press once before changing channels and theTV will wait
30 seconds before returning you to the original channel. Press
repeatedly to add more time.
CH ^ or CH v Scans up or down through the current channel
list. Press once to change the channel up or down; press and
hold to continue changing channels.
VOL< or VOL> DecreasesorincreasestheTV'svolume.
SOUND Press once to display the audio processor choice list.
Point and select to choose a different 3rocessor or press CLEAR
to exit.
GO BACK Returns you to the previous channel.
LED
SOUND GO BACK
CUI_E [NFO
_ENU CLEN_
,O20,O
40,O,O
,O,O,O
WHO,INPUT ANTENNA
0°0 t
REVERSE FLAY FORW,'_
_EC'VCR+ STOF3 PAUSE
22