Table of Contents
Advertisement
ADVANCED
CONNECTIONS
Advanced
connections
give you better sound and video by separating
the audio and video signals and enabling
you to connect multiple
components.
This section describes the types of inputs available
on the back of your
TV and suggests ways you can use them for optimum
performance.
Once you have made your connections
you will
need to program
the TV to tune
to the correct Video
INPUT channel
in
order to see and hear audio
and video
from the component.
You will program
this later in the Interactive
Setup.
Back of the
TV
The number of jacks on the back panel of your TV depends on the model
number of your TV. Find out the model number of your TV and look for
its corresponding
diagram
either below or on the next page. When
connecting
A/V cables, be sure to connect corresponding
OUT and IN
jacks (Video to Video, Right Audio to Right Audio, etc.).
Model
MR25515
AUDIO
VIDEO
R
L / MONO
" 1o o
ol 'N
R ol
> I0
VCR
I
CABLE/
CONTROL
ANTENNA
VIDEO and AUDIO IN
Use these input jacks to connect a VCR,
Laserdisc player, DVD player, satellite
receiver or Internet
Access
Device. To view the component
connected
to VIDEO, use the INPUT
button
on the remote.
AUDIO OUT
Use these output
jacks to connect to an audio receiver
or amplifier
for variable controlled
or fixed level stereo output.
VCR CONTROL
This jack is for a feature
not available
in your
market at the time of this printing.
The circuitry that would allow
this feature to work has been disabled in your TV.
CABLE/ANTENNA
Takes the signal input from a cable,
cable box, or an off-air
antenna.
Can also be used for basic
component
connections.
6
Advertisement
Table of Contents
