Table of Contents
Advertisement
Step 4: Plug in the TV
Plug the end into the wall outlet, matching the wide blade of the
plug with the wide slot in the outlet.
Be sure to insert the plug
completely.
Step 5: Place Batteries
in Remote
Remove the battery compartment
cover from the back of the
remote.
Insert fresh batteries. Make sure that the polarities
(+ and -)
are aligned correctly.
Replace the cover.
Step 6: Turn On the TV
PressTV on the remote, or press POWER on theTV itself. Pressing
theTV button not only turns on theTV, but puts the remote into'iV
mode, so that the buttons
on the remote will control'lV
functions.
On-Screen
Program
Guide
YheTV is designed
to bring up the GUIDE Plus+ on-screen program
guide when you use theTV button on the remote to turn on theTV
(after you have set up the GUIDE Plus+ system). For more
information
on setting up the GUIDE Plus+ system, see the next
section, Interactive
Setup.
To get out
of the GUIDE
Plus+
S_tem:
Press OK to exit the GUIDE Plus+ system and tune to the
highlighted
channel.
Press GUIDE to exit the GUIDE Plus+ system and tune to the
channel displayed
in theView
window.
Press CLEAR to exit the GUIDE Plus+ system
and go to the
last channel you were watching.
Step 7: Program the TV
Proceed to the next section, Interactive
Setup.The
interactive
setup
routine walks you through
the steps needed to configure
theTV.
10
Advertisement
Table of Contents
