RCA F32668YX53 User Manual page 17

Select YES if the cable box changed to channel 9, or NO if it did not. If you select NO, the system will try
another code.
If the GUIDE Plus+ system cannot recognize either your cable box orVCR after several tries, a screen stating
_Cable Box (VCR) test failed...Please consult your manual and try again" appears.You have a choice to either
Try Again or Skip Cable Box Setup. If you get this message, you should also:
Double check the brand of your cable box orVCR, and try entering it again.
Check to make sure the IR controllers are positioned correctly.
If you choose to skip the cable box (orVCR) setup some features of the guide may not be available until you
successfully complete this procedure.
Once the correct model of cable box (or
VCR) has been identified, you need to
set the cable box's output channel.
Enter the channel you use to view
channels through your cable box--
usually 3 or 4. Consult your cable box's
instruction book or your cable company
if you are not sure. Choose 0to use
VIDEO INPUT.
Select YESifyou have aVCR, or NOif
not. (Answering NO automatically skips
forward to the end of GUIDE Plus+
setup.)
Tune yourVCR to channel 2 and turn it
off.Then enter the brand of yourVCR.
When the GUIDE Plus+ system correctly
identifies the correct code for your VCR,
the VCR's tuner changes to channel 9.
Select YES if the VCR automatically
changed to channel 9, or NO if it did not.
If you select NO, the system will try
another code.
The last screen comes up when you've
successfully finished the GUIDE Plus+
setup.
15