Table of Contents
Advertisement
ASSEMBLY
To hire an authorized
service technician
to assemble the treadmill,
call toll=free 1 =800=445=2480.
Assembly requires
two persons.
Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance
lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-
mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
Assembly requires
the included hex keys
_ and your own phillips
screwdriver
adjustable
wrench
and wire cutters _->.
For help identifying assembly
hardware, see the drawings
below. Note: The assembly
hardware and other
small parts are packaged
in separate part bags. If a part is not in the part bags, check to see if the part has
been preattached.
To avoid damaging
plastic
parts, do not use power tools for assembly.
1/4" Star Washer (92)-4
Wheel Nut (21)-2
3/4" Screw (6)-2
3/4" Tek Screw (47)-4
5/16" x 1" Bolt
1/4" x 1" Bolt
(122)-4
(71)-4
4" Bolt (112)-2
N_
Wheel Bolt (107)-2
1. With the help of a second person, carefully raise the
Uprights (109) to the position shown.
Insert one of the Extension Legs (105)into the treadmill
as shown. Make sure that the Extension Leg is turned so
the Base Pad (100) is beneath it. Note: It may be helpful
to tip the Uprights (109) forward as you insert the
Extension Leg.
Insert the other Extension Leg (not shown) in the same
way.
109
1O0
105
Hide quick links:
Advertisement
Table of Contents
