ProForm PRO 2000 User Manual
  1. Manuals
  2. Brands
  3. ProForm Manuals
  4. Treadmill
  5. PRO 2000
  6. User manual

ProForm PRO 2000 User Manual

Treadmill
Hide thumbs Also See for PRO 2000:
Table of Contents

Advertisement

Quick Links

See also: User Manual
www.proform.com
Model No. PFTL13011.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.proformservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for ProForm PRO 2000

Summary of Contents for ProForm PRO 2000

  • Page 1 USER’S MANUAL Model No. PFTL13011.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.

  • Page 2: Table Of Contents

    Apply the decal in the location shown. Note: The decals may not be shown at actual size. PROFORM is a registered trademark of ICON IP, Inc.

  • Page 3: Important Precautions

    16. To informed of all warnings and precautions. purchase a surge suppressor, see your local PROFORM dealer, call the telephone number 3. Use the treadmill only as described. on the front cover of this manual, or see your local electronics store.
  • Page 4 DANGER: 20. Never leave the treadmill unattended while Always unplug the power it is running. Always remove the key, unplug cord immediately after use, before clean- the power cord, and press the power switch ing the treadmill, and before performing the into the off position when the treadmill is not maintenance and adjustment procedures in use.

  • Page 5: Before You Begin

    Thank you for selecting the revolutionary reading this manual, please see the front cover of this PROFORM PRO 2000 treadmill. The PRO 2000 manual. To help us assist you, please note the product ® treadmill offers an impressive selection of features model number and serial number before contacting us.

  • Page 6: Part Identification Chart

    PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.

  • Page 7: Assembly

    ASSEMBLY • To hire a service technician to assemble this • To identify small parts, see page 6. product in your home, call 1-800-445-2480. • Assembly requires the following tools: • Assembly requires two persons. the included hex keys • Place all parts in a cleared area and remove the packing materials.
  • Page 8 2. Pull the Upright Wire (88) and the Base Ground Wire (100) through the indicated hole in the Base (105). Attach the Base Ground Wire (100) to the Base (105) with a #8 x 1/2" Ground Screw (10). Press the Grommet (101) into the square hole in the Base (105).
  • Page 9 4. Hold the Left Upright (90) against the Base (105). Be careful not to pinch the wires. If necessary, position the Base Ground Wire (100) in the hole in the side of the Left Upright. Insert two 3/8" x 2 3/4" Screws (8) and two 3/8" x 1 1/4"...

  • Page 10: Hold The Left Handrail (92) Near The Left Upright

    6. Remove the four 3/8" x 1" Screws (6) and 3/8" Star Washers (14) from the Handrail Brackets (89). Then, remove the Handrail Brackets from the Left and Right Handrails (92, 93). The Screws and Star Washers will be used in step 8.
  • Page 11 9. Remove and discard the #10 x 3/4" Screws (3) from the Right Handrail (93) and the Left Handrail (not shown). Pulse Wire Hold the pulse assembly near the Right Handrail (93). Insert the pulse wire from the pulse assem- bly into the hole in the side of the Right Handrail Pulse and pull it out of the end of the Right Handrail as...
  • Page 12 12. With the help of a second person, hold the con- sole assembly near the Uprights (90, 99). Console Connect the Upright Wire (88) to the console Assembly wire. See the inset drawing. The connectors should slide together easily and snap into place.
  • Page 13 14. Attach a Tray Bracket (91) to the side of the Right Upright (99) with two #8 x 3/4" Screws (2). Make sure to use the two holes shown. Start both Screws, and then tighten them. Attach the other Tray Bracket (not shown) to the Left Upright (not shown) in the same way.
  • Page 14 17. Attach the upper end of the Storage Latch (65) to the Frame (64) with a 3/8" x 1 3/4" Bolt (7) and a 3/8" Nut (13). 18. Lower the Frame (64) (see HOW TO LOWER THE TREADMILL FOR USE on page 25). If one of the Rear Leveling Feet (69) doesn’t sit flat on the floor, turn the Rear Leveling Foot until it does, and then tighten the 1/2"...

  • Page 15: The Chest Heart Rate Monitor

    THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR • Do not expose the heart rate monitor to direct sun- light for extended periods of time; do not expose it to The heart rate temperatures above 122° F (50° C) or below 14° F monitor consists of (-10°...

  • Page 16: Operation And Adjustment

    OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same circuit.
  • Page 17 CONSOLE DIAGRAM FEATURES OF THE CONSOLE users, and access many other features. To purchase an iFit Live module at any time, go to www.iFit.com The treadmill console offers an impressive array of or call the telephone number on the front cover of features designed to make your workouts more effec- this manual.

  • Page 18: Step

    HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.

  • Page 19: Step

    4. Change the incline of the treadmill as desired. The Incline tab will show a profile of the incline set- tings of the workout. A new segment will appear at To change the incline of the treadmill, press the the end of each minute. The Speed tab will show a Incline increase or decrease button or one of the profile of the speed settings of the workout.
  • Page 20 6. Measure your heart rate if desired. 7. Turn on the fan if desired. Note: If you use the handgrip heart rate moni- The fan features several speed settings. Press the tor and the chest heart rate monitor at the same Fan increase or decrease button to select a fan time, the console will not display your heart speed or to turn off the fan.
  • Page 21 HOW TO USE AN ONBOARD WORKOUT and/or incline settings will appear in the display for a few seconds and the treadmill will automatically 1. Insert the key into the console. adjust to the new speed and/or incline setting. See HOW TO TURN ON THE POWER on page 18. The workout will continue in this way until the last segment of the profile flashes in the display and the 2.
  • Page 22 HOW TO USE AN IFIT LIVE WORKOUT button, the My Maps button, the World Tour but- ton, or the Event Training button to download the Note: To use an iFit Live workout, you must have an next workout of that type in your schedule. Press optional iFit Live module.
  • Page 23 6. Follow your progress with the displays. THE COOL-DOWN MODE See step 5 on page 19. To select the cool-down mode, press the Cool Down button. Then, press the Start button. The walking belt The My Trail tab will show a map of the trail you are will begin to move at 2.5 mph.
  • Page 24 THE INFORMATION MODE 3. CONTRAST LVL: Press the Incline increase and decrease buttons to adjust the contrast level of the The console features an information mode that keeps display. track of treadmill information and allows you to person- If a module is connected, you may also select the alize console settings.

  • Page 25: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero percent before you fold the treadmill. left.

  • Page 26: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by following c. Remove the key from the console, and then the simple steps below. Find the symptom that reinsert it. applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. d.
  • Page 27 SYMPTOM: The walking belt slows when walked on Lower the treadmill (see HOW TO LOWER THE TREADMILL FOR USE on page 25). Remove the three #8 x 3/4" Screws (2). Carefully pivot the a. Use only a surge suppressor that meets all of the Motor Hood (72) off.
  • Page 28 SYMPTOM: The walking belt is off-center or slips b. If the walking belt slips when walked on, first when walked on remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller a. If the walking belt is off-center, first remove the screws clockwise, 1/4 of a turn.

  • Page 29: Exercise Guidelines

    EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.

  • Page 30: Part List

    PART LIST Model No. PFTL13011.0 R0112A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw Walking Belt #8 x 3/4" Screw Platform Cushion Bracket #10 x 3/4" Screw Walking Platform 5/16" x 5/8" Screw Platform Cushion 3/8" x 2" Bolt Belt Guide 3/8"...
  • Page 31 Key No. Qty. Description Key No. Qty. Description Grommet Console Front Base Pad Console Frame Left Wheel Cap Console Clamp Wheel Console Ground Wire Base Cable Tie Heart Rate Strap Right Handrail Cover Heart Rate Sensor Left Handrail Cover Console Base Right Wheel Cap Audio Wire Base Pad...

  • Page 32: Exploded Drawing

    EXPLODED DRAWING A Model No. PFTL13011.0 R0112A...
  • Page 33 EXPLODED DRAWING B Model No. PFTL13011.0 R0112A...
  • Page 34 EXPLODED DRAWING C Model No. PFTL13011.0 R0112A 104 34...
  • Page 35 EXPLODED DRAWING D Model No. PFTL13011.0 R0112A...

  • Page 36: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

This manual is also suitable for:

Pftl13011.0

Table of Contents