9,
Attach the Seat (12) to the Seat Frame (5) with
four M6 x 63mm Button Screws (43) and four M6
Washers (44),
10, Unserta Pad Tube (10) into the Leg Lever (6),
Sfide two Foam Pads (14) onto the Pad Tube,
AssembJe the other two Pad Tubes (10} to the
Leg Lever (6} and the Seat Frame (5} in the
same manner.
11, Attach a Weight Rest Pin (24) to the Left Weight
Rest (51) with an M4 x 16mm Serf-tapping Screw
(38),
Sfide the Left Weight Rest (51) onto the indicated
Upright (4) and engage the Weight Rest Pin (24)
into the Weight Rest and Upright,
Repeat this step with the Right Weight Rest
(9) and other Upright (4}. Set both Weight
Rests at the same height.
12, Attach the CurU Pad (13) to the CurU Post (7) with
two M6 x 15mm Button Screws (40),
13, Make sure that aft parts have been properUy tight-
ened, The use of the remaining parts wHU be
expUained in ADJUSTMENTS,
beginning on the
next page,
10
11
14
12
f-.
5
43
10
6
10
\
--4
24
38
4
,
4O
14
8