Erasing Channels; Adding Channels - RCA IB-X20162GS Owner's Manual

Button
2. Erasing/Adding Channels in Channel Memory-
Erasing Channels
1. To erase a channel, first press
the CHANNEL A/V button
until the channel number you
want to erase appears on the
screen.
2. Then repeatedly press the
SETUP button until the
Channel Memory display
appears on the screen.
SETUP
CHAN HEMORY: STORED
12
3. Then push the "-" button to
erase that channel from
memory.
12
CHgN HEMORY: ERASED
4. Wait until Channel Memory
display disappears from the
screen. You can then check
channels in memory by
pressing the CHANNEL A or
V button. If you want to
erase another channel, repeat
steps 1 thru 3.
Adding Channels
I°
Repeatedly press the SETUP
button until the Channel
Memory display appears on
the screen.
SETUP
CHAH HEHORY: STORED
_2
2. To add a channel, press the
CHANNEL A/V button
until the channel number you
want to add appears on the
screen.
3. Then push the "+" button to
add that channel to the
memory.
CHAN HEHORY: ERRSED
O6
4. If you want to add another
channel, repeat steps 2 and 3.
Note: The Channel Memory display will automatically disappear from
the screen in a few seconds after you have finished erasing or adding
channels.
17