Adding Or Erasing Channels - RCA 20V500T User Manual

Rca 20v500t: users guide

Hide thumbs Also See for 20V500T:

Specification sheet (2 pages)

Table Of Contents

Table of Contents

You can add or erase channels from the list in the TV's

memory.

Press MENU to see the main menu.

Press CH+ or CH- to highlight Setup.

Press OK to enter the Setup submenu.

TV/CATV is highlighted. Press VOL+ or VOL- to select

TV or CATV (whichever you have). Details are on page

11.

Press CH+ or CH- repeatedly to highlight Channel.

Press VOL+ or VOL- to enter the channel number

you want to add or erase.

Press CH+ or CH- repeatedly to highlight Add/Erase.

Press VOL+ or VOL- to choose Add or Erase.

If you select Add, the channel will be available when

you press CH+ and CH- to move through the

channels. Choosing Erase will remove the channel

from the TV's memory. The channel will not be

available when you flip through channels with the

CH+ and CH- buttons.

Press MENU repeatedly to exit the menu or the menu

will automatically disappear within a few seconds if

no buttons are pressed on the remote control.

You won't see the change take effect until you scroll

through the channels in memory using the CH+/-

buttons.

Model 20V500T: If you have this model you will not

see the Sound menu option and your remote will not

have MTS or SOUND buttons.

Helpful Hint

You cannot select the Setup

menu if the TV is set to a video

input channel (FRNT). Press

INPUT repeatedly to get to

regular TV programming.