Choosing The Best Location - RCA IB-X20162GS Owner's Manual

Unpacking TV
Shown here are the accessories that
come packed with your TV. When
you unpack your new set. be sure you
have removed all the accessories and
information sheets. We recommend
that you save the packing materials
and box in case you ever need to ship
or store your TV.
Choosing the Best Location
• Choose a location that is
convenient but away from sources
of heat such as direct sunlight and
heating units.
• Allow for air circulation around the
set. This is especially important if
you install it in a cabinet with
several other components. Cleaning
the ventilation slots on the cabinet
Remote Control
<+ -0
Two Batteries
for Remote Control
Antenna Adapter
Replace adapter only with
RCA stock # 193983.
at regular intervals will help assure
adequate ventilation.
To prevent electric shock, avoid wet
areas such as kitchens or
bathrooms.
Try to avoid direct light on the
screen during operation. Because
the picture tube emits light, direct
light on the screen will weaken
picture quality and intensity.
If you are using an indoor antenna,
an outside wall is a good location.
You may want to try a few
different locations to find the best
possible spot for reception.
Note: Your TV operates on 120 volts,
60 Hz (normal household current) and
has a polarized plug. Because one
blade of the plug is wider than the
other, the plug fits into the wall
socket only one way. Do not defeat
the safety feature of this plug. If you
need to use an extension cord, make
sure it is polarized.
Your TV has been designed with a
special convenience feature that will
automatically program active channels
into your television's memory the first
time you turn it on. To use this
feature:
!. Attach antenna(s) or cable-TV
system to back of TV.
2. Then plug power cord into wall
outlet.
3. Press POWER button to turn on
TV. Your TV will automatically
cycle through all channel
numbers and place active
channels into the Channel Scan
Memory.
The Channel Scan Memory is the list
of channels your TV will stop on
when you press the CHANNEL A or
V buttons.
This display will appear on the screen
while your TV is autoprogramming
active channels.
G7
AUTOPROGRAHHIHO
When your TV is finished
autoprogramming, it will tune to the
lowest channel number in its Channel
Scan Memory. You can check the
channels in memory by pressing the
CHANNEL A or V buttons. Your
TV will stop on each channel in
memory.
You can also add or erase individual
channels as desired. Details are on
page 17.
3