RCA IB-X20162GS Owner's Manual page 8

Follow one of these steps to connect a cable-TV system to your TV instead of a home antenna.
Note: Since cable-TV systems vary, you may wish to consult your local cable-TV company for
additional information.
_Jk Follow this diagram if your cable company does not require a converter/decoder box (no scrambled channels):
incoming (]_
Cable
I _T_m
BACK OF TV
B Follow this diagram if your cable company requires a converter/decoder box for scrambled "premium" channels:
INCOMING
CABLE
-- I _IU..
I m+_tmu
CONVERTER OECOI_ R
Note: These optional accessories (2-way splitter (_), A/B switch (_), three coaxial cables (_))
are available as a kit under RCA #AH038BL.*
• The "'A" position on the A/B switch lets you select all
non-scrambled channels by remote control.
• The "B'" position allows you to select scrambled channels
via the converter box. Remember to tune your TV to the
output channel of the converter box (usually 2, 3, or 4)
when selecting channels via the converter box.
•Optional accessory available from your RCA dealer or electronic supply store.
BACK OF TV