XXXXX XXXX Instruction Manual Model XXXXXX Place photo here TEMPLATE Note Red items, delete or alter as required throughout. 21" PURE FLAT COLOUR TELEVISION Model RCA - 21T68 Please read these instructions carefully and retain for future reference.
Page 2
Help line For assistance during normal working hours (9am-5pm, Mon-Fri, New Zealand local time) call Oriental Pacific International Ltd. NZ call: 0800 89 85 80 Email: service@orientalpacific.com SYMBOLS The graphic symbols used in this manual or on the back cover of the set mean the following: Read this manual in full before use.
IMPORTANT SAFEGUARDS When using any electrical apparatus always observe safety regulations and use basic safety precautions to reduce the risk of fire, electric shock and personal injury, including the following Read, Keep and Follow these instructions, heeding all Warnings. WARNING! No objects filled with liquid, such as vases, shall be placed on this equipment or in any position where liquid may fall into this equipment or any other electrical apparatus.
Page 4
CLEANING WARNING! Before you attempt to clean the television screen or cabinet, always disconnect the appliance from the mains power and remove the plug from the main power outlet. Clean the television with a soft dry cloth only. Never use any harsh chemical cleaning agent or water as this may damage the television.
Remote Control - Full Function Infra-red Remote BASIC OPERATIONS Controller 4.1.1 SWITCH ON AV I/O - 2 RCA-type AV Input 4.1.2 SWITCH OFF RCA-type AV Output 4.1.3 MAIN MENU SELECTION - 1 DVD Input 4.1.4 MENU ENTRIES - S-VIDEO INPUT 4.1.5 MENU CONTROLS...
1.2 PRECAUTIONS CLEANING THE UNIT WARNING • When the cabinet has become dirty or stained, TO REDUCE THE RISK OF FIRE OR dip a piece of gauze or soft cloth into a dilute ELECTRIC SHOCK, DO NOT EXPOSE solution of neutral cleanser and wipe clean. THIS EQUIPMENT TO RAIN OR Never use thinner or benzene since they will MOISTURE.
DESCRIPTION OF CONTROL KEYS & CONNECTOR 1.3.1 FRONT PANEL Channel searching upward/d ownward in 1. POWER BUTTON To turn ON/OFF the TV set. MANUAL and FINE menu. 6. MENU BUTTON STANDBY INDICATOR To display the main menu. Lights when the TV is in the standby mode. Press and hold the MENU button for over 3 REMOTE SENSOR seconds, it will perform AUTO SEARCH function.
OPERATION OF REMOTE CONTROL 1.4.1 DESCRIPTION OF REMOTE CONTROL KEYS 1. STANDBY button 9. FAVORITE button Press to browse the channels in your Favorite list. 2. MUTE button Press to mute or restore the TV sound. 10 TV/AV button 3. SLEEP button (TV channel,VIDEO1,VIDEO2,DVD) Repeatedly press to set the sleep timer from 120 to 10 minutes.
2. CONNECTIONS 2.1 INSTALLATION OF ANTENNA VHF TV ANTENNA UHF TV ANTENNA TO TV ANTENNA JACK 75 OHM COAXIAL CABLE 75 OHM DIN. 300 OHM 75 OHM ADAPT OR 300 OHM FLAT CABLE Connect the 75 OHM coaxial cable from the antenna to the antenna jack on the rear panel, as shown above.
4. TV OPERATIONS 4.1. BASIC OPERATIONS 4.1.1 SWITCH ON Press POWER button on the main unit to turn on/off the TV set. If the standby indicator lights up, TV is in standby mode. To turn on the TV from standby mode, press STANDBY button on the remote control or the PROGRAM UP/ DOWN or TV/AV button on the front panel of the main unit.
4.2.2 MANUAL SEARCH To preset the TV channel to your desired position number, manual searching should be used. Activate PRESET menu. POSITION BAND VHFL MANUAL DOWN Press PROGRAM UP/DOWN to select POSITION, then press VOLUME UP/ SKIP FINE DOWN DOWN to select the program No., e.g. 30. AUTO MEMORY MENU Press PROGRAM UP/DOWN to select BAND, then press VOLUME UP/...
4.2.5 CHANNEL SKIP After the auto search, some fault stations may be memorized because the TV station broadcasts with different frequencies for your local or neighborhood regions. Activate PRESET menu. Press PROGRAM UP/ DOWN to select POSITION, then press VOLUME UP/DOWN to select the channel No.
4.3.2 PICTURE ADJUSTMENTS To adjust your TV picture, select a channel and follow the steps below: Activate PICTURE menu. CONT Press PROGRAM UP/DOWN to highlight your choice: CONT(CONTRAST), BRIGHT, BRIGHT COLOR, SHAPR, TINT or COL. TONE(COLOR TONE). COLOR SHARP Press VOLUME UP/DOWN to increase/decrease the element you chose. However, TINT + 0 - COL.TON...
5. SUPER FUNCTIONS 5.1 CHILD LOCK Child lock allows you to lock the buttons on the front panel of the TV. Activate FEATURE menu. Press PROGRAM UP/ DOWN to select SETTING. COLOR AUTO CHILD LOCK Press OK to enter SETTING submenu display. Press PROGRAM UP/DOWN to highlight CHILD LOCK.
Only when you win one level of the game, you can enter the next higher level. Pressing VOLUME UP/DOWN can select from level 1 to the level next higher than that you have passed. For example, if you have passed level11, pressing VOLUME UP/DOWN can select only from 1 to 12, and the higher levels(13-20) above 12 can not be selected at all.
6. TROUBLESHOOTING 6.1 PROBLEMS OF PICTURE The most common types of picture problems are as follows: IGNITION Black spots or horizontal streaks appear, or the picture flutters or drifts. This is usually caused by interference from car ignition system, neon lamps, electric drills, or other electrical appliances. GHOSTS Ghosts are caused by the television signal following two paths.
SPECIFICATIONS Description 21” Colour Television Power input AC 230-240V 50Hz Power consumption TV system PAL BG (NTSC Playback) Language of OSD English Function adjust MENU display Channel memory 100 (0-99) Picture tube 21”(51cm) Net weight 23Kg Dimensions 610X500X456mm (WxDxH) Body size: Note: Design and specifications are subject to change without prior notice for the purpose of performance improvement.