RCA IB-X20162GS Owner's Manual page 11

Channel Number Display
• Shows the number of the
channel you're watching.
• Appears whenever TV is
turned on, channel is changed,
or DISPLAY button is
pressed.
• Also appears whenever you
change volume with the
VOLUME buttons on the TV.
@
SETUP Button
• Press repeatedly until the
function you want appears on
the screen.
• Function choices will appear
in this order:
1) AutoProgramming Channel
Memory,
2) Adding or Erasing Channels
in Channel Memory, and
3) Changing Cable/Air
Setting.
• Details about using each
function begin on page 14.
POWER Button
• Press once to turn on TV.
• Press again to turn off TV.
@ DISPLA Y Button-Press to
display channel number on the
TV screen.
®
VIDEO Button
* Press repeatedly until the
video function you want
appears on the screen.
• Function choices will appear
in this order:
i) Color Adjustment,
2) Tint Adjustment,
3) Contrast Adjustment,
4) Brightness Adjustment,
5) Sharpness Adjustment,
6) Picture Reset (returns
picture controls to their
factory settings).
• Details about using each
function begin on page 12.
®
VOLUME Buttons (Also "-"
and "+" Buttons)
• Press VOLUME + to increase
volume.
• Press VOLUME - to
decrease volume.
• The - and + buttons are
used to make adjustments
after the VIDEO or SETUP
button is pressed.
@
CHANNEL A and V Buttons
• Press CHANNEL A to see the
next higher channel in
memory.
• Press CHANNEL V to see the
next lower channel in memory.
®
Remote Sensor-Receives
commands from the remote
control. When using the remote
control, point it toward this
sensor.