RCA IB-X20162GS Owner's Manual page 7

Follow one of the steps below to connect an indoor or outdoor antenna to your TV (only if
you do not have a cable-TV system).
A If the antenna cable coming from your home antenna is a 75-ohm round coaxial cable that carries only VHF
(channels 2-13), only UHF (channels 14-69), or VHF and UHF, connect it to your set like this:
B
C
D
INCOMING
CABLE
FROM
HOME
ANTENNA
VHF or UHF Only
or
VHF/UHF Combination
I CABLE/
I_NITENNA
-OR-
BACK
OF
TV
If the antenna cable coming from your home antenna is a 300-ohm flat twin lead that carries only VHF
(channels 2-13), only UHF (channels 14-69), or both VHF and UHF, connect it to your set like this:
I CABLFJ I
INCOMING _ I _ I
CABLE _' _ Push on BACK
-t 1 OF
HOME -- "IV
ANTENNA VHF or UHF Only
or Adapte
VHF/UHF Combination (supplied)
-OR-
If the antenna cables coming from your home antenna(s) are a 75-ohm round coaxial cable that carries VHF
(channels 2-13) and a 300-ohm flat twin-lead cable for UHF (channels 14-69), connect them to your set like
this:
..... I ANTENNA
INCOMING UHF [
CABLES _- Push on____ jl.. (_ BACKoF
FROM _ AND TV
HOM
ANTENNA(S) VHF - -- --
Transformer**
Note: Be sure to connect the
UHF
antenna cable to the (such as RCA #AH011)
UHF screws on the Antenna Mixer and the VHF
antenna cable to the screws marked VHF.
Antenna Mixer*
(use only RCA #193984)
-OR-
If the antenna wires coming from your home antenna(s) are two 300-ohm flat twin-lead cables as shown
here, connect them to your set like this:
INCOMING UHF
CABLES
FROM _ and
HOME
ANTENNA(S) VHF
Antenna Mixer*
Note: Be sure to connect the UHF antenna cable to the
UHF screws on the Antenna Mixer and the VHF
antenna cable to the screws marked VHF.
Push on
(use only RCA #193984)
I CABLE/I
I _'_IENNA I
" ' BACK
TV
r _
*__ Optional accessory available from your RCA Dealer.
-,Ri'-Onl3_'use
RCA Antenna Mixer (Stock # 193984).
**Optional accessory available from your RCA dealer or
electronic supply store.
5