RCA IB-X20162GS Owner's Manual page 17

Your TV is so automatic that you will
probably never need to change this
function. That's because when your
set autoprograms the Channel
Memory, it automatically adjusts the
Cable/Air setting for you.
The Cable/Air function tells your TV
whether you have a cable-TV system
or a home antenna connected to it.
During AutoProgramming the TV
automatically determines whether
cable signals or antenna (air) signals
are being received. It will then
automatically set the Cable/Air
function.
When the Cable/Air function is set to
Cable, it allows the TV to receive
cable channels. When the Cable/Air
function is set to Air, it allows the TV
to receive whatever TV channels
(VHF and UHF) are broadcast in
your area.
Normally you will never need to use
this function because your TV
automatically autoprograms itself and
selects the Cable/Air setting the first
time you turn it on (and after each
extended power interruption). The
Cable/Air function allows you to
override the automatic settings and
thus provides maximum flexibility
should you desire to use your TV for
special applications.
- Changing the
Cable/Air Function
.
Repeatedly press the SETUP
button until the Cable/Air
function appears on the TV
screen.
SETUP
2. Press either "-'" or "+" to
change the Cable/Air
function.
E][Z]
12
CABLEIAIR: CABLE
Note: The Cable/Air function will
change each time you press the
"- " or "+" button.
15