Channeu Menu - Mitsubishi Mr.Slim WD-52627 Owner's Manual

Channel Menu
Figuye 17
Figure 17. Channel Menu
After the avaiiaMe channeis have been memorized with
Memorize Channeis on the Setup menu, weaker channeis
can be added or unwanted channeis can aiso be debted.
Press CH _k or V on the remote controi to see the
channeb in memory. Press ADJUST A or V to sebct
Added or Debted for the channei shown in the Channei
number box.
Sebct the antenna for the channeis you want to edit. You
can sebct Ant-1 (main) or Ant-2 (Aux).
Prefer DigitaJ
When a memorized channei number is avaiiabb as both
anaiog and digitai, a check mark in the Prefer Digitai box
will allow digitai channeis to dispiay and anaiog channeb
to be hidden (when using CH A or _. Removing the
check mark will show both analog and digital choices.
Analog channels shown on Antenna-1 or Antenna-2 can
be named (up to four characters). After you enter a
name, it will appear on the TV screen, next to the channel
number.
1. Press ADJUST A or Y to select each letter.
2. Press ENTER to set the letter and move to the
next letter position.
3. Press CANCEL to move back one position.
Digital channels are automatically named if the
broadcaster sends the information.
Channels can be changed in 3 ways:
By pressing ADJUST A or Y to select the channel.
By pressing CH A or Y for channels already in
memory.
Directly entering the number. With so many current
and potential channels, the number range is greatly
expanded. Channels can be one part, analog or
digital (up to the number 16388) or two part, for digital
channels (these use a separator). For a two part
digital channel, you may press SUB/CANCEL on the
remote to enter a separator after the first, second or
third number, depending on the broadcaster's channel
information.
For digital channels, when the broadcaster has sent a
virtual channel number, the virtual channel number is
shown in the text box and the original digital channel
is shown below on-screen, as a reference.
70 Chapter 5. TV Menu Screen Operations