Mitsubishi Mr.Slim WD-52627 Owner's Manual page 50

Edit NetCommand®: Add Devices, continued
Figure 18. [Device] Learn screen
to deHete the current Hetter and move back one character
position. When in the first position, the CANCEL button
wifl return the name to the defauHt name.
[Device] Advanced Learn Screen
Figure 19
After Hearning the basic device keys, the [Device]
Advanced Learn screen allows you to Hearnany speciaH
keys for your device. Most common IR remote controH
signaH formats can be Hearned by NetCommand.
A tame of speciaHized device keys is shown in Appendix
E. You onHy need to Hearnthe functions your devices
respond to and can ignore the functions that do not appHy
to your device.
Figure 19. [Device] Advanced Learn screen
Figure 20. Name screen
Connection for [Device] Screen
Figure 2I
SeHect the TV and AiV receiver inputs that the device is
connected to. Connecting onHyaudio to the AiV receiver
is recommended. The AiV receiver may need configuring
for digital audio.
Name Screen
Figure 20
The Name screen allows you to change the default
name for each device to a custom name of up to eight
characters (including a blank spacd}, selecting from
letters, numbers and nine different characters. Press
ADJUSTA or T to select each letter, then press ENTER to
move to the next position. Press CANCEL on the remote
Figure 21. Connection for [Device] screen
50 Chapter 3. NetCemmand Setup and Editing