Dvd Player With Component Video; Dvi Device - Mitsubishi Mr.Slim WD-52627 Owner's Manual

Connecting a DVD Pmayer with Component Video
Connecting a DVl Device
DVD PJayer with Component Video
Figure 9
Component video cables and audio cables are required,
These are not included with the TV,
1_ Connect the Component Video cabHes from Y/Pd
Pb VIDEO OUT on the back of the DVD pHayerto
COMPONENT-2 on the TV back panel matching the
correct connection:
Y to Y (Green)
Pr to Pr (Red)
Pb to Pb (BHue)
2_ Connect a set of audio cabHes from AUDIO OUT
on the back of the DVD pHayerto COMPONENT-2
AUDIO Input on the TV back panel The red came
connects to the R (right) channeH, and the white came
connects to the L (Heft)channel
Figure 9. Connecting a DVD Player with Component
Video
Note: NetCommand® assumes you connected your
DVD pHayer to Component-2. If you add a second
DVD or use any other inputs for your DVD, this change
must match in the NetCommand system. See Edit
NetCommand... in Chapter 3 for more information.
DVl Device
Figure 10
A DV/-to-HDMI cable or DVI/HDMI adaptor and HDM/cable
and audio cables are required, These are not included with the
TV, They may be available at your local electronics retailer,
1. Connect the DVI-to-HDMI cabHe (recommended) or
HDMI cabHe with DVliHDMI adaptor from the DVI
device's back panel to the TV back panel.
NOTE: If you are using a DVI/HDMI adaptor, it is
important to connect the adaptor to the DVI device
for best performance.
2. Connect a set of audio cables from AUDIO OUT
on the DVI device back panel to the INPUT/DVI
Analog Audio on the TV back panel. The red cable
connects to the R (right) channel, and the white
cable connects to the L (left) channel.
NOTE: The HDMI connection supports copy
protection (HDCP). Some devices require
connecting to an analog input first, in order to view
on-screen menus and select DVI as the ouput.
Please review your equipment instructions for DVI
connectivity and compatibility.
Figure 10. Connecting a DW Device
Chapter 2. Connecting
29