NordicTrack E 3800 User Manual page 24

THE INFORMATION MODE/DEMO MODE
The console features an informationmode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The informationmode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition,the informationmode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the main display will
show the following information:
The left side of the main /I- 5
display will show the total --I
number of hours that the !
treadmill has been used. O_G'TIME P AC_O
TIME
The center of the main o
display willshow the total _ 9 9
number of miles that the
walking belt has moved. O,STA_C_= °
An "E" for English miles or
an "M" for metric kilometers
will appear on the right side
of the main display. Press
the Speed + button to
change the unit of measure-
ment.
HOW TO ADJUST THE CUSHIONING SYSTEM
The treadmillfeatures a cushioning system that re-
duces the impact as you walk or run on the treadmill.
To increase the
firmness of the
walking platform,
turn the adjust-
ment knob coun-
terclockwise. To
decrease the
firmness, turn the
knob clockwise.
Note: The faster Cushion
you run on the
treadmill, or the
more you weigh, the firmer the cushioning system
should be.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more
features to the console. The chest pulse sensor provides
hands-free operation and enables you to use the con-
oP sole's heart rate programs. To purchase the
optional chest pulse sensor, call toll-free 1-800-
734-2377.
IMPORTANT: Make sure [
that there is not a letter t TI
"D" in the main display. If J-!
a "D" appears in the display, Pso OPULSE FATO
CALORIES
the console is in the =demo"
mode. This mode is intended
to be used onlywhen a treadmill is displayed in a store.
When the consoleis in the demo mode, the powercord
can be pluggedin, the key can be removedfrom the
console,and the displaysand indicatorson the console
will automaticallylight in a preset sequence, although
the buttonson the console willnot operate. If a "D" ap-
pears in the display when the information mode is
selected, press the Speed - button so that it disap-
pears.
To exit the information mode, remove the key from the
console.
24