Replacing The System Board; Entering The Service Tag In The Bios - Dell Inspiron One 2305 Service Manual

1 hexnut screws (2)
3 screws (8)
Replacing the System Board
1. Follow the instructions in
2. Align the connectors on the system board with the slots on the chassis.
3. Replace the eight screws that secure the system board to the chassis.
4. Using a hex nut driver, replace the two hex nut screws that secure the system board to the chassis.
5. Connect all the required cables to the system board.
6. Replace the processor (see
7. Replace the processor heat-sink (see
8. Replace the processor heat-sink fan (see
9. Replace the Mini-Card(s) (see
10. Replace the memory module(s) (see
11. Replace the MXM assembly (see
12. Replace the MXM-assembly fan (see
13. Replace the system-board shield (see
14. Follow the instructions from
15. Replace the back cover (see
CAUTION:
result in damage to the computer.
16. Turn on the computer.
NOTE:
17. Enter the Service Tag (see
Entering the Service Tag in the BIOS
1. Turn on the computer.
Great user manuals database on
2 system board
Before You Begin.
Replacing the Processor).
Replacing the Processor Heat
Replacing the Processor Heat-Sink
Replacing the Mini-Card(s)).
Replacing Memory
Replacing the MXM
Replacing the MXM-Assembly
Replacing the System-Board
step 4 to step 5 in Replacing the Front
Replacing the Back Cover).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
After you have replaced the system board, enter the computer's Service Tag into the BIOS of the replacement system board.
Entering the Service Tag in the
UserManuals.info
Sink).
Fan).
Module(s)).
Assembly).
Fan).
Shield).
Stand.
BIOS).