Replacing The System Board - Dell Inspiron One 19 Touch Service Manual

1 system board
Replacing the System Board
1. Follow the procedures in Before You
2. Align the screw holes on the system board with the screw holes on the chassis.
3. Replace the four screws that secure the system board to the chassis.
4. Connect all the cables to the system board.
5. Replace the processor (see
6. Replace the processor heat sink (see
7. Replace the coin-cell battery (see
8. Replace the Mini-Card (see
9. Replace the memory module(s) (see
10. Replace the system-board shield (see
11. Replace the inverter (see Replacing the
12. Replace the back metal shield (see
13. Replace the I/O bracket (see
14. Replace the back cover (see
15. Replace the display bezel (see
16. Replace the speaker cover (see
17. Replace the decorative cover (see
18. Replace the optical drive (see
19. Replace the computer stand (see
20. Replace the I/O cover (see Replacing the I/O
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
21. Turn on the computer.
2 screws (4)
Begin.
Replacing the Processor).
Replacing the Processor Heat
Replacing the Coin-Cell Battery).
Replacing the Mini-Card).
Replacing Memory Module(s)).
Replacing the System-Board
Inverter).
Replacing the Back Metal Shield).
Replacing the I/O Bracket).
Replacing the Back Cover).
Replacing the Display Bezel).
Replacing the Speaker Cover).
Replacing the Decorative Cover).
Replacing the Optical Drive).
Replacing the Computer Stand).
Cover).
Sink).
Shield).