Replacing the Coin-Cell Battery
1. Follow the procedures in
Before You
2. Insert the new coin-cell battery into the socket with the side labeled "+" facing left and then snap the coin-cell battery into place.
3. Replace the system-board shield (see
4. Replace the inverter (see
Replacing the
5. Replace the I/O bracket (see
6. Replace the back cover (see
7. Replace the display bezel (see
8. Replace the speaker cover (see
9. Replace the decorative cover (see
10. Replace the optical drive (see
11. Replace the computer stand (see
12. Replace the I/O cover (see
Replacing the I/O
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
13. Connect your computer and devices to electrical outlets, and then turn them on.
14. Enter the system setup utility (see
Back to Contents Page
Begin.
Replacing the System-Board
Inverter).
Replacing the I/O
Bracket).
Replacing the Back
Cover).
Replacing the Display
Bezel).
Replacing the Speaker
Cover).
Replacing the Decorative
Cover).
Replacing the Optical
Drive).
Replacing the Computer
Stand).
Cover).
System Setup
Utility) and restore the settings you recorded in
Shield).
step
1.